Description
Anaconda X Wide Cut Diamond Blades are for cutting grooves for traffic loops, detector loops in factory floors or for burying power or gas lines. Use for cutting asphalt, green concrete or highly abrasive cured concrete. Available in 7"-18", Anaconda X Wide Cut Blades feature a specially heat treated core that dissipates heat and will withstand the demands of wider cuts. The result is a diamond blade that produces outstanding cutting performance, reliability and a low cost per cut.
- Varying thicknesses from 1/8" (.125") to 1/2" (.500")
- Use on hand-held gas or electric saws, 5-35 HP gas or electric walk-behind saws.
- Diamond segments are ISO certified and precision ground for smooth, rapid cutting.
Limited Lifetime Warranty
All diamond tool products including blades, coring bits, hole saws and grinding wheels include a limited lifetime warranty against warping, cracking and material defects. If any diamond tool (being used for its intended purpose with at least 50% of the diamond life remaining) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the tool may be replaced free of charge.
Use the table below as safe speed guidelines for your diamond blade.
| Blade Diameter | Rec. RPM | Max. RPM |
| 4" | 9,000 | 15,200 |
| 4-1/2" | 8,000 | 13,500 |
| 5" | 7,200 | 12,200 |
| 6" | 6,500 | 11,090 |
| 7" | 5,100 | 8,730 |
| 8" | 4,500 | 7,640 |
| 9" | 4,000 | 6,700 |
| 10" | 3,600 | 6,115 |
| 12" | 3,000 | 5,095 |
| 12" High Speed | N/A | 6,300 |
| 14" | 2,500 | 4,364 |
| 14" High Speed | N/A | 5,460 |
| 16" | 2,200 | 3,800 |
| 16" High Speed | N/A | 4,724 |
| 18" | 2,000 | 3,300 |
| 20" | 1,800 | 3,000 |
| 24" | 1,500 | 2,550 |
| 26" | 1,300 | 2,350 |
| 28" | 1,200 | 2,185 |
| 30" | 1,200 | 2,040 |
| 32" | 1,100 | 1,910 |
| 36" | 1,000 | 1,700 |
| 42" | 800 | 1,455 |
| 48" | 700 | 1,275 |
*Recommended RPM based on 9,500 SFPM.
You may also like
Browsing history