Highly efficient and easy to install, the Saw Muzzle is designed for use with a 2 HP industrial vacuum system and can be installed on left bladed worm drive circular saws (7"-8") in minutes. Excellent for crack chasing, tuck pointing and cutting all materials that create toxic dust.
OSHA 2017 Silica Dust Requirements specify a HEPA vacuum with 220 CFM for diamond blades 7" in diameter.
A 220 CFM Vacuum System is required to be in compliance.
The Saw Muzzle fits Skil, Milwaukee, Bosch, Makita and Other Worm Drive Saws.
The Saw Muzzle is designed to work with the industrial grade worm drive
circular saws to collect point of origin dust created from cutting concrete,
fiberglass or any other materials that create toxic dusts. The Saw Muzzle
will also fit some of the left hand bladed side drive saws.
Use the Saw Muzzle Cross Reference to order the correct Saw Muzzle for your saw.
How it works: The Saw Muzzle is made from fiberglass filled ABS plastic and is very durable and abrasion resistant. It uses centrifugal force generated by the saw blade to direct the dust into the intake port of the unit. When connected to an industrial grade 2hp vacuum system, it can remove up to 95% of the dust created at the point of origin.
Applications: The Saw Muzzle is excellent for cutting cinder block, brick, stone and composite materials. When fitted with a tuck-pointing blade, it can be used for removing rotten concrete from brick grout joints. When used with a 1/4" or a 3/8" crack chasing blade, it is excellent for crack chasing on parking structures or other flat surfaces. When used with a saw blade, it is excellent for cutting fiberglass and concrete.
The Saw Muzzle also works well with the Blade Roller to make a stable rolling platform for cutting and crack chasing.
Features: Fits worm drive and hypoid drive left bladed circular saws. Excellent for Tuck Pointing, Crack Chasing and Cutting and works well with concrete, fiberglass and wood.